Corro Egy

Corro Egy Fire Proofing Coating 9000

Solvent-free, Thixotropic intumescent epoxy coating, for jet fires and hydrocarbon pool

Corro Egy Solvent free poly urethane 2 k

Solvent-free two-component Poly urethane (2-K-PUR) systems have been approved over decades as suitable protective coatings systems.
Those products are being used for tanks, buried pipelines, steel constructions, fittings and tubes (steel & ductile iron). For renovation in the field , Poly urethanes are of growing importance because of their superior curing characteristic- also at low temperatures - and their outstanding mechanical properties. performance is clearly the key parameter for the success of this technology.

Corro Egy POLY URETHANE SF 8000

POLY URETHANE SF Coating 8000 is a two component sprayable solvent free Poly urethane based on special polyol and aromatic Isocyanate resins with an excellent abrasion resistance and flexibility on primed concrete and steel surfaces.

Corro Egy intumescent fire protection coating 6000

Corrofire 6000 is an intumescent fire protection coating with an excellent thermal efficiency in today’s market. From a design standpoint, it is now possible to achieve 60 Minutes fire protection to steel structural with only 1.5 mm. thickness.

Corro Egy A water base intumescent fire protection coating 7000

Corrofire 7000 is a water base intumescent fire protection coating with an excellent thermal efficiency in today’s market. From a design standpoint, it is now possible to achieve 60 Minutes fire protection to steel structural with only 1.5 mm. thicknesses.

Corro Egy PTFE 9060-9061

Smooth feeling, excellent non-stick property and chemical resistance superior surface effects, it will be suitable for people who is more likely to stew and boil, Corro Egy has a higher interpretation about lifestyle.

Corro Egy waterborne 9060-9061

Smooth feeling, excellent non-stick property and chemical resistance superior surface effects, it will be suitable for people who is more likely to stew and boil, Corro Egy has a higher interpretation about lifestyle.

Corro Egy Waterborne Teflon Nonstick Coatings operation manual 9060-9061

- Before use, Coating temperature must be reach 15℃ or more.
- the dispersion must be fully dispersed.
- Do not use the precipitate at the bottom.
Fig. 1 shows a method of dispersing a paint, and the roll machine is rotated at a rotational speed of 30 to 50 rpm for about 20 minutes for dispersion.

CETPC-9070

CETPC-9070 is water-base Temporary Protective coating, Spray-on Temporary Protective layer.

CETPC-9070-1

CETPC-9070-1 is water-base Temporary Protective coating, Spray-on Temporary Protective layer.

CETPC-9070-2

CETPC-9070-2 is water-base Temporary Protective coating, Spray-on Temporary Protective layer.

Corro Egy Corropoxy Light Filler 9090

- Corropoxy light Filler 9090 is an epoxy light filler used for repair of crack and damage for boats
- Corropoxy light filler 9090 Used for metals, wood and GRP.
- Corropoxy light filler 9090 can be used under and above the water line.
- Corropoxy light filler 9090 can be applied up to 2 cm thicknesses.

CER 6778

CER 6778 is an APEO free aqueous dispersion based on acrylic esters and styrene. Excellent Water Retention Properties.

CER 6881

CER 6881 is an aqueous dispersion based on styrene and acrylic acid esters. This product is environmentally advanced (APEO free).
Excellent Water Retention Properties.

Corro Egy Nano Coating 4000

Corro Egy Nano Coating is a solvent-free Nano compound in the form of two medium-viscosity compounds with a compatible special hardening system.

Corro Egy Proof Coating 5007

- Chemically treated cement with industrial plastics and graduated fillers.
- Mix with liquid and paint concrete surfaces to insulate water.
- Its industrial plastics (which are in liquid condition) are decomposed on the concrete surface, penetrate into concrete pores and condense into a series of chemical reactions that form a layer of Corro Proof Coating in the areas of the pores and become an integral part of the origin.

Corro Egy Nano adhesive 5000

CORRO EGY Nano adhesive is a solvent-free polyurethane adhesive with a single compound.
Used for vertical applications due to its heavy (gel) and anti-liquefaction strength.
The drying process is caused by its interaction with moisture and results in a strong water-insulating layer.
CORRO EGY Nano adhesive is highly vulnerable to water infusion as well as heat proof due to the slight increase in volume it produces after the dry phase.

Corro Egy Zinc 4010

Two component polyamide zinc rich epoxy primer.

Corro Egy Poxy coating 4020

Two component high build polyamide cured epoxy coating.

Corro Egy THANE 4030

Recoatable two component aliphatic polyurethane Isocyanate cured finish.

Corro Egy tank coating SF 4050

Two component solvent free polyamine cured modified epoxy coating.

CESSTPC-9050

CESSTPC-9050 is water-base Temporary Protective coating, that provides Clear or color layers coating which creates a protective membrane when dried.
It forms a tough Coating that easily peels away when the protection is no longer required.
CESSTPC-9050 will protect the substrate for a minimum of 6 -12 months and will protect the substrate for the require period during export Overseas shipment. and will be readily peelable when required.
CESSTPC-9050 is a fast drying, Provides multi metal protection. Excellent UV resistance. Provides a non-tacky film.

CESSTPC-9050-1

CESSTPC-9050-1 is water-base Temporary Protective coating, that provides Clear or color layers coating which creates a protective membrane when dried.
It forms a tough Coating that easily peels away when the protection is no longer required.
CESSTPC-9050-1 will protect the substrate for a minimum of 12 - 18 months and will protect the substrate for the require period during export Overseas shipment. and will be readily peelable when required.
CESSTPC-9050-1 is a fast drying, Provides multi metal protection. Excellent UV resistance. Provides a non-tacky film.

CESSTPC-9050-2

CESSTPC-9050-2 is water-base Temporary Protective coating, that provides Clear or color layers coating which creates a protective membrane when dried.
It forms a tough Coating that easily peels away when the protection is no longer required.
CESSTPC-9050-2 will protect the substrate for a minimum of 18 - 24 months and will protect the substrate for the require period during export Overseas shipment. and will be readily peelable when required.
CESSTPC-9050-2 is a fast drying, Provides multi metal protection. Excellent UV resistance. Provides a non-tacky film.

CEAKS 9085

CEAKS-9085 Corro Egy Alkaline solution is a heavy-duty alkaline cleaner/degreaser for cleaning industrial, oil field, commercial, and marine equipment. CEAKS-9085 is designed for use in power washing machinery, high agitation parts washers, and high-pressure spray washers.
CEAKS-9085 is non-flammable, contains inhibitors to protect metal parts from corrosion after cleaning.

Corro Egy Strippable Protective coating 9040

Corro Egy Strippable coating Spray-on Strippable Protective Coating

Corro Egy Strippable Protective coating Brochure 9040 Solvent Base

A Clear and color layers coating that creates a protective membrane when dried. It forms a tough Coating that easily peels away when the protection is no longer required